Name: PrimoChill System Reboot - Cooling Loop Treatment
Brand: PrimoChill
SKU: PC-SBOOT
Price: 8.95 USD
Availability: InStock

BLACK FRIDAY SALE | Spend $100 get 10% OFF | Spend $300 get 15% OFF | Spend $500 get 20% OFF

View catalog Search

Get 10% Off Your Order Today
Sign in Sign in
Login
Login

Email*

Password* Toon Hide Forgot your password?

Don't have an account yet?
Create account
Cart

PrimoChill System Reboot - Cooling Loop Treatment

Product form

$8.95

Primochill System Reboot was created to address the need to prepare/clean existing cooling loops AND be able to clean out old dyes that may have leached onto components during previous... Read more

SKU: PC-SBOOT

In stock, In Boise ID USA In stock, In Boise ID USA
This item is in stock and can be shipped out the same day if ordered before 2 pm MST.

Out of Stock, Pre-Order
This product will be dispatched from our warehouse in Boise, ID within 10 to 24 business days.

Out of Stock, Special-Order
This product will be dispatched from our warehouse in Boise, ID within 20 to 35 business days.

No Hassle Returns within 30 days

Pay within 30 days with Klarna or Shop Pay

Order $125.00 or more and enjoy free shipping. This offer is valid for deliveries within the Lower 48 States.

Shop the look

Product title
In stock, In Boise ID USA In stock, In Boise ID USA
This item is in stock and can be shipped out the same day if ordered before 2 pm MST.

Out of Stock, Pre-Order
This product will be dispatched from our warehouse in Boise, ID within 10 to 24 business days.

Out of Stock, Special-Order
This product will be dispatched from our warehouse in Boise, ID within 20 to 35 business days.
$0.00
Product title
In stock, In Boise ID USA In stock, In Boise ID USA
This item is in stock and can be shipped out the same day if ordered before 2 pm MST.

Out of Stock, Pre-Order
This product will be dispatched from our warehouse in Boise, ID within 10 to 24 business days.

Out of Stock, Special-Order
This product will be dispatched from our warehouse in Boise, ID within 20 to 35 business days.
$0.00
Product title
In stock, In Boise ID USA In stock, In Boise ID USA
This item is in stock and can be shipped out the same day if ordered before 2 pm MST.

Out of Stock, Pre-Order
This product will be dispatched from our warehouse in Boise, ID within 10 to 24 business days.

Out of Stock, Special-Order
This product will be dispatched from our warehouse in Boise, ID within 20 to 35 business days.
$0.00
Product title
In stock, In Boise ID USA In stock, In Boise ID USA
This item is in stock and can be shipped out the same day if ordered before 2 pm MST.

Out of Stock, Pre-Order
This product will be dispatched from our warehouse in Boise, ID within 10 to 24 business days.

Out of Stock, Special-Order
This product will be dispatched from our warehouse in Boise, ID within 20 to 35 business days.
$0.00
Product title
In stock, In Boise ID USA In stock, In Boise ID USA
This item is in stock and can be shipped out the same day if ordered before 2 pm MST.

Out of Stock, Pre-Order
This product will be dispatched from our warehouse in Boise, ID within 10 to 24 business days.

Out of Stock, Special-Order
This product will be dispatched from our warehouse in Boise, ID within 20 to 35 business days.
$0.00

Description

Primochill System Reboot was created to address the need to prepare/clean existing cooling loops AND be able to clean out old dyes that may have leached onto components during previous usage. Similar to Sysprep this flush style solution will cleanse out any debris/residue leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. The beauty of ReBoot is it's ability to pull color from stained components.

Features

Water Based
Environmentally Responsible, Safe, and Non Toxic Product
Pre-Mixed. Just Add to a Gallon of Water
Safe on All Plastics, Rubbers, and Miscellaneous Gasket Materials, Including Acrylic.

Specifications

Bottle Size: 15ml
Dosage: Mix with 1 Gallon of DI or distilled water
Shelf Life: 2 Years, Unopened

Compatibility

ReBoot is compatible with rigid and flexible tubing of all sizes. It is safe to use on rubber, plastics and acrylics so rest assured all your seals, o-rings, reservoirs and such are all safe!

This item is not compatible with aluminum water cooling components.

Included Parts

1x 15ml Bottle of ReBoot (makes 1 gallon of loop prep)

Instructions

1.Install your cooling loop and double-check connections to ensure loop is “closed”. No Leaks!
2.Empty bottle of ReBoot into 1 US Gallon of fresh DI or Distilled water, and shake for 30 seconds
3.Add mix to cooling loop.
4.Fill loop with treated solution and be sure to remove as many air bubbles as possible.
5.Start loop pump and begin circulating the treated solution.
6.Run treated solution for at least 24 to 48 hours to ensure loop is properly flushed and treated. While using for longer periods of time doesn't have negative effects, ReBoot is not an effective final coolant and should be replaced with coolant before any extended use of computer.
7.Drain System. Inspect drained solution for debris or foreign particles. Dispose of drained solution. Repeat flush if needed.
8.Fill system with fresh DI or distilled water and flush thoroughly to remove ReBoot solution checking for foam.
9.Drain system.**.
10.Fill loop with your choice of coolant and begin water-cooling.

** Reboot needs to be flushed from the system until no foam is seen and water runs clear

Method 2

1.Install your cooling loop and double-check connections to ensure loop is “closed”. No Leaks!
2.Fill entire loop with DI or distilled water. (leave room for System Reboot)
2.Add Full bottle of the system ReBoot Pre-Treatment.
3.Top off with DI or distilled water if needed.
4.Start loop pump and begin circulating the treated solution.
5.Run treated solution for at least 24 to 48 hours to ensure loop is properly flushed and treated. While using for longer periods of time doesn't have negative effects, ReBoot is not an effective final coolant and should be replaced with coolant before any extended use of computer.
6.Drain System. Inspect drained solution for debris or foreign particles. Dispose of drained water. Repeat flush if needed.
7.Fill system with fresh DI or distilled water and flush thoroughly to remove ReBoot solution checking for foam.
8.Drain system.**.
9.Fill loop with your choice of coolant and begin water-cooling.

** Reboot needs to be flushed from the system until no foam is seen and water runs clear

Warnings

Do not mix with any pre-mixed coolants.
This item is not compatible with aluminum water cooling components
Not responsible for any hardware damage. Use at your own risk.

Good preventative measure!

I like to run reboot in my systems before adding new coolant. I think it is a good idea to flush your system with at minimum distilled water before changes, but it's a better idea to run a loop cleaner like this to help remove anything that might have built up.

Solid price and shipping is always fair and quick!

I have purchased probably 10 of these and will keep doing so as long as I'm liquid cooling.

It never fails. I love this stuff!

This is my second time using this product and it just doesn’t disappoint. Nothing to it, follow the directions to a perfect T. Again it doesn’t leave everything 100% sparking clean but it definitely cleans and lifts any debris that’s stuck on tubing or reservoirs. I personally use glass reservoirs and tubing and I’m always just so satisfied with the outcome.

Amazing Stuff in that bottle

I have used System Reboot on my rigs for years and it is the only way I service my PCs, save me so much time and effort on keeping my blocks clean

AMAZING!

second time ordering this stuff. did a couple flushes of distilled then filled the system and let let it run for 2 days (used then put a dummy cable on at night so it can run non stop) had a nice white film from opaque fluid. once i was one i flushed it out and my loop was crystal clear! flushed with distilled water, in goes the Primo Prep then back to opaque.

love this stuff. you take care of your loop and you never have the nightmare stories you see on the internet. Great product and even better comany!

Good for system cleaning!!!

Before anything! If you think this will “scrub” everything don’t have that idea. It’s just a cleaner I do recommend it for sure to prep your build for the next fluid regardless if you use vue or another opaque fluid It’s definitely something that you want to do. Now if your blocks are gunked up then obviously you need to take apart the blocks and clean them properly because this won’t break the chunks down and clean it 100%. It will definitely lift some things off but won’t get it 100%. It’s a good product! I definitely will be buying more In the future.

1 2 3

Top Products

Clearance / Closeouts

PrimoChill System Reboot - Cooling Loop Treatment

Recently viewed products

My Wishlist

Size chart

My Wishlist