PrimoChill SXT D5 Pump Reservoir Combo Builder – Black POM – 9 Tube Heights, Choose your color
A complete pump system, mounted three ways
The D5 pump, armor, reservoir and mounting bracket come as one system, color-matched and built to install in minutes.
- Radiator, wall or stand. One bracket mounts the whole unit to a radiator, the case wall or the floor of the case.
- 120 mm bracket. It fits any 120 mm fan position or bolts straight to a radiator.
- Anti-vibration pads. The pump is isolated from the case, so it runs quiet.
- Color-matched. The bracket is finished to match the armor, in Satin Black, Sky White, Sky Blue, Gold, Copper, TX Matte Gun Metal.
- Every screw included. Hardware to mount it to the reservoir, the wall or the base of the case is in the box.
About this kit
Crafted from high-quality POM for dependable operation. An armored pump cover and tube ring finish off its clean, modern appearance.
Ships with the pump already installed in the base. It takes any standard D5, so the pump can be swapped later.
It includes mounting hardware, making it easier to integrate into your custom build regardless of the layout of your case. Setting up and maintaining your reservoir is a breeze, and the clear tube also makes it easy to monitor coolant levels and maintain cleanliness.
Our wide range of colors guarantees that you will find the ideal match for your project. Mixing and matching different color combinations can help you achieve a distinctive look that distinguishes your build.
- 1 × D5 Pump HeadInstalled
- 1 × Custom-Length Tube
- 1 × Top 3 Port CapInstalled
- 1 × D5 PumpInstalled
- 1 × SXT Colored Armor (Ring, D5 Cover)Installed
- 1 × SXT Colored Rad/Wall/Floor Mounting System w/all hardware
Use of caustic and/or abrasive coolant will void your warranty (see warranty section) and may cause your pump to fail. Do not run the pump dry.
The D5 and DDC range of pumps are designed to be self-lubricating, meaning the fluid that the pump is designed to move is also used to lubricate its internal parts.
Therefore, you should not run the pumps without fluid for any reason. Running these pumps dry creates internal friction between the ceramic bearing and bearing housing, and that heat can quickly crack or melt the bearing housing.
Running pumps dry (without fluid) immediately voids the warranty. Replacements will not be provided under these condition
See it in your color
The D5 base, armor and mount in each finish. Pick yours above.
What buyers said
Left by people who bought this part here. Compatibility reports are the useful ones — if you installed it, say which board.
Before you install it
This kit is the plumbing between your parts, not the loop itself. Plan and dry-fit every run before you cut or bend, and whatever the build, the last step does not change: leak test before power. Run the pump on a bench supply with the rest of the system unpowered. 24 hours is the standard, an hour is the minimum.
Questions people ask about this kit
Answers specific to this kit. If yours isn't here, ask — we'd rather talk you out of the wrong part than sell you one.
What's in this kit?
What else do I need for a loop?
Can I return it if it turns out not to fit?
Who handles the warranty?
Is shipping free?
Are printed instructions included?
Do I need anything else to use it?
Ask us before you order
Send your exact hardware model and we'll confirm the right part before you spend $204.98 — or tell you honestly that this isn't the one.
Returns are accepted within 30 days and are easy to start in the support center. Unopened items can be returned for store credit with no restocking fee; other returns carry a restocking fee, higher for items that have been installed or used.