Tube reservoirs are often plagued with either a vortex issue or a noise issue because of today's high flow systems. Complex anti-vortex paddles or walls have been designed to help reduce the vortex, however even with this slight obstruction the flow is decreased.

The simplicity of the ZenCoil results in the calming effect desired with even less obstruction of flow. A wide variety of colors with simple and straight forward installation will get your system to Zen in no time.

Features

• Fits Any Tube Reservoir
• Zero Flow Impact
• Large Range of Colors
• Enough for 2 Small Reservoirs

Specifications

• 0.125in. Thick Coil
• 12in. Coil per package
• Virgin PVC
• Made in the USA

Included Parts

• 1x 12in. PrimoChill ZenCoil - Tube Reservoir Calming Coil

Installation

First, access the inside of your tube reservoir. Next, twist the coil to make the outside of the coil smaller than the inside of your tube reservoir. Then, insert the end of the coil into your reservoir and continue to twist the coil until it reaches the bottom of the reservoir.  

Once the coil reaches the bottom, release the coil and it will press firmly up against the side of your reservoir.   Continue to twist the coil inside the tube reservoir until a 1/2in. space is between each level of the coil. (For example: A 240mm long reservoir will need approximately 6in. of coil to deliver proper fluid transfer. (Results of In House Testing)).

Finally, cut any excess of  the coil that  remains outside the reservoir.

Warnings

Reservoir not included. Not responsible for any hardware damage. Use at your own risk.